Use the Sketch Board toolbar

Use the Sketch Board toolbar

You'll use the Sketch Board toolbar to define the correct answer to your sketch question while working in the Question Editor.

The Sketch Board tools that you use to plot the curve of the correct answer will be visible to the student on their Sketch Board toolbar when they attempt your sketch question.

General tips

Here are some general tips for using the Sketch Board toolbar while authoring your sketch question:

• To use a tool from the toolbar, click on it so that it becomes highlighted.

• To stop using a tool from the toolbar, click on the highlighted tool again or click on a different tool.

• Hover your cursor over a plotted point to reveal its exact coordinates as an ordered pair (x-coordinate, y-coordinate).

• Click-and-drag a plotted point or curve to reposition it on the Sketch Board.

Tools on the Sketch Board toolbar

You can perform a range of tasks using the sketching tools from the Sketch Board toolbar.

• Plot a single point

• Draw a line

• Draw an absolute value

• Draw a two-point parabola

• Draw a three-point parabola

• Draw a parabola segment

• Draw an exponential curve

• Draw a logarithmic curve

• Draw a background curve

• Draw a curve to be repositioned

• Select a region of a plot

• Make a line solid or dashed

• Remove a portion of a curve

• Remove a portion of a curve between two points

• Include or exclude an endpoint

• Delete a plotted element

Plot a single point

To plot a single point:

1. Click Plot Dropline Point.

2. Click on the Sketch Board plotting area where you want your single point plotted.

Draw a line

To draw a line:

1. Click Draw Line.

2. Plot two points on the Sketch Board plotting area. A line is automatically drawn through the points.

Draw an absolute value

To draw a vertex and an additional point as an absolute value:

1. Click Draw Absolute Value.

2. Plot the vertex on the Sketch Board plotting area.

3. Plot the second point on the Sketch Board plotting area. The absolute value curve is automatically drawn through the points.

Draw a two-point parabola

To draw a two-point parabola:

1. Click Draw Vertex-Point Parabola.

2. Plot the vertex on the Sketch Board plotting area.

3. Plot your second point on the Sketch Board plotting area. The curve is automatically drawn through the points.

Draw a three-point parabola

To draw a three-point parabola:

1. Click Draw Three-Point Parabola.

2. Plot the three points in any order on the Sketch Board plotting area. A curve is automatically drawn with the vertex at the middle point.

Draw a parabola segment

To draw a parabola segment:

1. Click Draw Three-Point Parabola Segment .

2. Plot the three points in any order on the Sketch Board plotting area. A curve is automatically drawn with the vertex at the middle point.

Draw an exponential curve

To draw two points and a horizontal asymptote as an exponential curve:

1. Click Draw Exponential.

2. Plot two points on the on the Sketch Board plotting area.

3. Click the location on the Sketch Board plotting area where you want to place the horizontal asymptote for the curve. A dashed horizontal line is automatically drawn through the point on the plotting area where you clicked.

Draw a logarithmic curve

To draw two points and a vertical asymptote as a logarithmic curve:

1. Click Draw Logarithmic.

2. Plot two points on the Sketch Board plotting area.

3. Click the location on the plotting area where you want to place the vertical asymptote. A dashed vertical line is automatically drawn through the point on the plotting area where you clicked.

Draw a background curve

To draw a read-only background curve that remains visible to students during their entire question attempt:

1. Draw a curve on the Sketch Board plotting area using the desired sketching tools.

2. Click Switch Pre-Drawn .

3. Click on the curve that you drew in step 1. This curve becomes thin and a read-only background curve that will appear visible on the student's Sketch Board plotting area during their attempt that can't be interacted with.

Draw a curve to be repositioned

To draw a curve that students can reposition on the plotting area:

1. Draw a curve on the Sketch Board plotting area using the desired sketching tools.

2. Click Switch Pre-Drawn .

3. Click-and-drag the curve that you drew in step 1 to a new position on the plotting area.

4. The original curve is a thin gray curve while the repositioned curve is a blue curve. Students must click-and-drag the original gray curve to the position of the repositioned blue curve to get the question correct.

Select a region of a plot

The Choose Region tool allows you to select a region on either side of a single straight line or select a region bounded by two straight lines to indicate the correct answer.

To select a region of a plot:

1. Draw a straight line on the Sketch Board plotting area using the desired sketching tools.

2. Click Choose Region.

3. Click anywhere on the plotting area inside the region that represents the solution set to the problem. The region becomes shaded and indicates the correct answer.

Make a line solid or dashed

To toggle between making a straight line solid or dashed:

1. Click Toggle Solid/Dashed.

2. Click on a drawn straight line. If the line was solid, then the entire line becomes dashed.

Remove a portion of a curve

To remove a portion to the left or right of a curve:

1. Click Snip Left or Snip Right.

2. Click on the portion of the drawn curve you want to keep. The portion to the left or right of your cursor (depending on the selected control) is removed.

Remove a portion of a curve between two points

To remove a portion of a curve between two selected points:

1. Click Snip Between.

2. Select two points on the drawn curve by clicking on them. A green point indicates each selected location. The portion of the curve between these two green points is automatically removed.

Include or exclude an endpoint

To toggle between including (filled) and excluding (open) an endpoint:

1. Click Toggle Filled/Hollow.

2. Click on the endpoint that you want to include (fill) or exclude (open).

Delete a plotted element

To delete a plotted element (Example — line, curve, point, etc.) from the Sketch Board plotting area:

1. Click Delete.

2. Hover your cursor over the element that you want to delete. The element becomes highlighted.

3. Click the highlighted element and it will be deleted from your Sketch Board plotting area.